Remora - ethernet NVEM / EC300 / EC500 cnc board

I believe so. 

just use the one here github.com/scottalford75/Remora-NVEM/tree/main/Firmware
use only the files in that repo for linuxcnc installation as well, the remora-nv one
everything in the videos about this stm board will still be relevant im sure


these stm ethernet boards have more users than i would have guessed

Thanks, much appreciated!
Yeah, the board was a pretty attractive option when I bought about 6 years ago.

I'm still having issues with interference with the encoder. But it works at very low speed. I'm trying to get the feed per rev working but I can't.  anyone spot any issues with the halshows pins in the video? Spindle is working fine and displayed on the axis scale. It looks like there is no spindle rev ,

youtube.com/shorts/x5vOVZpoqSU?si=Opf2Nhoud6VPGWp0

Hey Murphy, i cant really see whats happening in the video but i think I can tell

github.com/cakeslob/RRW_LAB/blob/inc/Lin...c/remora_encoder.hal
github.com/cakeslob/RRW_LAB/blob/inc/Lin...c/remora_spindle.hal
check out these 2 hal files, specifically the encoder one, or just try them out. the encoder one has a lowpass filter to smooth out the rpm signal

Thanks cakeslob, I copied everything from yours last time, the only thing I don't have is the low pass, I'll give it a shot thanks