Remora for RP2040

I have found an example of communication between RPi5 (RP1) and RP2040 over SPI:  rpi5-rp1-spi . Perhaps it can be useful?

Hello everyone, can someone send an example of a PWM spindle configuration with feedback? HAL file and config.txt for loading into rp 2040

The software Remora PWM module would need to be ported over to the RP2040 firmware. Or better still, a hardware version developed.

are you going to do it? or some problem and it is not possible? i tried to understand the original firmware cat but it seems to be too complicated for me...

linuxgizmos.com/updated-wiznet-reveals-n...ernet-functionality/

Raspberry Pi RP2350 and the fully hardwired TCP/IP controller W5500 enhancing the capabilities of the traditional Raspberry Pi Pico2 board with additional Ethernet functionality via W5500

Bari wrote:

linuxgizmos.com/updated-wiznet-reveals-n...ernet-functionality/

Raspberry Pi RP2350 and the fully hardwired TCP/IP controller W5500 enhancing the capabilities of the traditional Raspberry Pi Pico2 board with additional Ethernet functionality via W5500

Thanks, just ordered one with GoFundMe contributions.