Pokeys_homecomp EncoderSearch / Encoder Arm Topic: Pos_Fb Following errors

Hello, I have followed the instructions on the very first page of this topic and have had success until i tried to compile with the gcc compiler using the following commands

pi@raspberrypi:~ $ gcc -Wall -Os -g -I. -I/usr/include/libusb-1.0 -I/usr/include -L/usr/lib/ -L/usr/lib/arm-linux-gnueabihf/ -lPoKeys -lusb-1.0 -I/usr/realtime-3.4-9-rtai-686-pae/include -I. -I/usr/realtime-3.4-9-rtai-686-pae/include -I/usr/include/i386-linux-gnu -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -fno-math-errno -funsafe-math-optimizations -fno-rounding-math -fno-signaling-nans -fcx-limited-range -mhard-float -DRTAI=3 -fno-fast-math -mieee-fp -fno-unsafe-math-optimizations -DRTAPI -D_GNU_SOURCE -Drealtime -D__MODULE__ -I/usr/include/linuxcnc -Wframe-larger-than=2560 -URTAPI -U__MODULE__ -DULAPI -Os -o pokeys ./pokeys.c -Wl,-rpath,/lib -L/lib -llinuxcnchalth
gcc: error: unrecognized command line option ‘-mieee-fp’

the very last line above I am getting a gcc error, any ideas what is causing it and how to get it working. thanks

bugs.debian.org/cgi-bin/bugreport.cgi?bug=588960

Leads me to believe that the answer might be to leave out that modifier in your architecture.

Hi all,

First of all. my name is Erik (from Holland) and i am new to this forum and linuxcnc. At the moment i have converted a mill to cnc with enclosure.
I got a controll pannel with touchscreen that works fine on linux.

Now i got some buttons and potentiometers i want to in stall. i got pokeys57u for that.
I installed everything but it seems not to working. I pree installed the ports 1 to 6 and 45 to 47 on the pokeys57u on pokeys software.
On linux i can't get it to work. Got no signals, but if i ask for usb devices is there with the serial number.

Does some one want to lead me to find the problem and get it working?

Have you compiled the component described at the beginning of this thread? You probably need the shared library too.

Perhaps say at which point in the setup things stop working?

Last time i compiled this i had to install the developmrnt version so the compile would work. That was a couple of years ago.

Jim

Yes, i complied the library and followed the instructions.

There is a section pokeys in halshow, I do every step to make conection with the serial number.
Unfortunately nothing happening. no signals or so. even not in halscope.

I don't know where to look anymore.