Pimping the mini-lathe

More
6 years 8 months ago #158289 by RotarySMP
Replied by RotarySMP on topic Pimping the mini-lathe
I just uploaded episode 5. You can see Bob's 3D printed lap in all it's glory.


Mark
The following user(s) said Thank You: phillc54

Please Log in or Create an account to join the conversation.

More
6 years 7 months ago - 6 years 7 months ago #159443 by RotarySMP
Replied by RotarySMP on topic Pimping the mini-lathe
Just uploaded episode 6.
Last edit: 6 years 7 months ago by RotarySMP.
The following user(s) said Thank You: phillc54, rodw, J Green

Please Log in or Create an account to join the conversation.

More
6 years 7 months ago #160302 by RotarySMP
Replied by RotarySMP on topic Pimping the mini-lathe
Since the bed was about as stiff as a wet noodle, I reinforced it. Now it approaches the stiffness of dry noodle!

The following user(s) said Thank You: phillc54, tommylight, J Green

Please Log in or Create an account to join the conversation.

More
6 years 7 months ago #160356 by J Green
Replied by J Green on topic Pimping the mini-lathe
Mark
Big thanks for the updates. This lathe project end result will end up with a much better lathe.
A usual discussion is comparing the final result to some existing lathes , but to my thinking if cost + knowledge an skill gained is factored in then the result is worthwhile. So thank's for showing your efforts.

It appears "The MAHO retrofitting family gathering " at your house this summer may be postponed .:lol:
What a big Bummer. Oh will , hope we all will be available then.

Stay warm -- an healthy

Please Log in or Create an account to join the conversation.

More
6 years 7 months ago #160554 by RotarySMP
Replied by RotarySMP on topic Pimping the mini-lathe
Yepp, this might be a rather trying period. I will do my best to keep you entertained.

Please Log in or Create an account to join the conversation.

More
6 years 7 months ago - 6 years 7 months ago #160953 by RotarySMP
Replied by RotarySMP on topic Pimping the mini-lathe
I hurried up a bit and got episode 8 done today.



Enjoy,
Mark
Last edit: 6 years 7 months ago by RotarySMP.
The following user(s) said Thank You: phillc54, tommylight, HiioHoi

Please Log in or Create an account to join the conversation.

Moderators: piasdom
Time to create page: 0.227 seconds
Powered by Kunena Forum