Forum Menu

Mesa 7i95

More
6 years 11 months ago #151395 by PCW
Replied by PCW on topic Mesa 7i95
Did you copy the new Makefile to the src directory?

Please Log in or Create an account to join the conversation.

More
6 years 11 months ago - 6 years 11 months ago #151396 by Gnevko
Replied by Gnevko on topic Mesa 7i95
yes, i checked it more times

copied to following directory: /home/cnc/linuxcnc-dev/src/
Last edit: 6 years 11 months ago by Gnevko.

Please Log in or Create an account to join the conversation.

More
6 years 11 months ago #151399 by PCW
Replied by PCW on topic Mesa 7i95
Yeah the makefile was missing the latest new module
try refetching newmesa.zip, it should be fixed now

Please Log in or Create an account to join the conversation.

More
6 years 11 months ago #151400 by Gnevko
Replied by Gnevko on topic Mesa 7i95
Thank you, I will try it tomorrow. Is it enough just to call "make" command again or I need begin from scratch? I never build something under Linux... till now

Please Log in or Create an account to join the conversation.

More
6 years 11 months ago #151401 by PCW
Replied by PCW on topic Mesa 7i95
That should work

Please Log in or Create an account to join the conversation.

More
6 years 11 months ago #151427 by Gnevko
Replied by Gnevko on topic Mesa 7i95
Hi, now I downloaded the file "newmesa.zip" again, unzip it to the corresponding directories and build all stuff again with "make -B" command (just "make" didn't nothing). The result is the same as above. It seams, that newmesa.zip file is the same as last time.

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson
Time to create page: 0.178 seconds
Powered by Kunena Forum