ColorCNC Colorlight 5A-75E/5A-75B as FPGA controller board

More
4 years 3 months ago #247409 by svb
Replied by svb on topic ColorCNC Colorlight 5A-75E/5A-75B as FPGA controller board
Dear Peter.
All files in attached archive. 

File Attachment:

File Name: colorlight...-svb.zip
File Size:1,128 KB

Please Log in or Create an account to join the conversation.

More
4 years 3 months ago - 4 years 3 months ago #247570 by vit74vit
Replied by vit74vit on topic ColorCNC Colorlight 5A-75E/5A-75B as FPGA controller board
Hello!
I have the same problems as svb:
- input pin don`t work right
- stepgen auto starting with random value

Output pin and PWM work fine,

card Colorlight 5a-75b V8.0

 

File Attachment:

File Name: Vit_5a-75b...0.tar.gz
File Size:69 KB
Last edit: 4 years 3 months ago by vit74vit.
The following user(s) said Thank You: svb

Please Log in or Create an account to join the conversation.

More
4 years 3 months ago - 4 years 3 months ago #247865 by vit74vit
Replied by vit74vit on topic ColorCNC Colorlight 5A-75E/5A-75B as FPGA controller board
To check the hardware, I tried Inga's colorcnc project ( this ). Inputs, outputs and PWM work correctly. There are questions with stepgens, but they are related to hal file settings.
Last edit: 4 years 3 months ago by vit74vit.

Please Log in or Create an account to join the conversation.

More
4 years 3 months ago #248233 by mehdidadash
Replied by mehdidadash on topic ColorCNC Colorlight 5A-75E/5A-75B as FPGA controller board
Is it possible to make 5 axis closed loop cnc with the 5A-75E/5A-75B boards ? 

Please Log in or Create an account to join the conversation.

More
4 years 3 months ago #248267 by xu
Replied by xu on topic ColorCNC Colorlight 5A-75E/5A-75B as FPGA controller board
Dear svb
To run LiteX-CNC do I have to install LiteX first?
Can a tutorial on detailed commands be issued?

Please Log in or Create an account to join the conversation.

More
4 years 3 months ago #248275 by svb
Replied by svb on topic ColorCNC Colorlight 5A-75E/5A-75B as FPGA controller board

Dear svb
To run LiteX-CNC do I have to install LiteX first?
Yes, of course

Can a tutorial on detailed commands be issued?
What tutorial you mean?
For LiteX? On github LiteX page.
For Litex-CNC? On github Litex-CNC page.
The following user(s) said Thank You: xu

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson
Time to create page: 0.192 seconds
Powered by Kunena Forum