Probe Interface Board Design (resistance switching)

Sorry for late reply i actually mate a small accident at shop...
Yes its mechanical probe that use same principle Ball and Leg type and ya it is possible to wire physical contact.
i have put it somewhere once i find out will post picture of it.

Oooo - exciting!!! Well, for me, at least.

 

Shall we have a sweepstake on how many routes I broke?

could you please share schematic and Gerber files cant wait to try on mine omp60 i just find mine probe will share pics once assemble it.

Hi Yagnesh

Yes, I will share all the schematic and gerbers on github - although I have a few spare v1.0 PCBs but I haven't yet tested on the CNC - still have to print a case to avoid shorting on all the chips.

Talking of pictures, here's the first one fully soldered without releasing any blue smoke (paired, obviously, with a Mostly Printed Probe). 



Philip

yrsiddhapura wrote:

could you please share schematic and Gerber files cant wait to try on mine omp60 i just find mine probe will share pics once assemble it.
 

I have also an omp60 without receiving unit..
if you find solution how to operate it without receiver please tell me.

Well i am planing to use it as wired probe with fletch's interface board as i am gone use it on a HBM machine which doesn't an ATC so for me its not important whether its wired or wireless.