Padovani Labor-e 275 lathe retrofit

Hai Mr. Random!

i've got some questions about the retrofit, is it possible to get in contact?
thanks.

Kujo wrote: Hai Mr. Random!

i've got some questions about the retrofit, is it possible to get in contact?
thanks.

you can ask here or
lukaszradomski+linuxcnc @ gmail.com

Hi i have also a padovani 275e sin805/611a no backups and eeprom error when trying to load plc eeprom seems like its wery hard to get it working i consider doing mesa/linuxcnc conversion if someone would like to share configs and electrical shematic since mine is incomplete thinking of keeping padovanis controlls for manual operation it would be great

  recently I got a brilliant idea to update my 2 year old running system to version 2.8.0 (fresh install debian 10 preempt-rt iso)
when I first did this retrofit I run pncconf got the machine running and it was basically it, it was good enough for the jobs I run
but now I wonder if my config was shit to begin with because after updating to 2.8.0 with the same settings I got joint following error when using G0 on X axis and what's really annoying Axis GUI lags/hangs for 5-20seconds when I execute any movement let it be from mdi command or a program AND then try to switch between manual control and mdi (F3-F5)
it also lags when I pause a program (spindle is running) and I try to use File/Machine/View menu
what I have:
COMM_TIMEOUT = 1.0
SERVO_PERIOD = 1000000
what setting can I try to change?


 

What is the [DISPLAY} CYCLE_TIME in your .ini file?

There was a change in units at one time
and some LinuxCNC setups ended up with
a disagreement on units resulting in _LONG_
poll intervals

I have CYCLE_TIME = 0.010 in [TASK]
and CYCLE_TIME = 0.100 in [EMCIO]
don't have one in [DISPLAY]