C coded dxf to g-code converter, the building process...

There is no place like 127.0.0.1 !

There is no place like 127.0.0.1 !

For the local Mytube adres (Mytube localhost) there are over 3x254 adresses available, i did not look for more :
127.0.0.1 up to 127.0.0.255
127.0.1.0 up to 127.0.1.255
127.1.0.0 up to 127.1.0.255

With linux you can load a text file including all the alias dot com sites of the world !

Look at a tiny code example, for fun : www.myccode.tk
I am looking for a more silent c code example. This code is server side reloading the html page. I am searching for a code to only reload a part of the site, like <frame>

For your own linux server hosting company, made a tutorial at : www.mydebiandomain.tk

I will try to show a minimalistic Mytube basic site example soon. Will reserve a tube domain for that to test it

Any news on the converter? Sourcecode, maybe?

Hi,

Source is over here : github.com/grotius-cnc/QT_cadcam

At the moment programming a new converter, that will include a pocket algoritme for milling machines.
the algortime functionality will look like : github.com/jbuckmccready/CavalierContours
But coded by me from scratch and including a spline offset algoritme.

I thought you were kidnapped by that 3 letter organisation never to be seen again !
Nice to see you back.

tommylight wrote: I thought you were kidnapped by that 3 letter organisation never to be seen again !
Nice to see you back.

Plus 1