HP-copaq NC8000

PCW
Away
Moderator

30 Oct 2012 04:34 #26021 by PCW

Replied by PCW on topic HP-copaq NC8000

Yes the problem is this:

Local APIC disabled by BIOS -- you can enable it with "lapic"

wiki.linuxcnc.org/cgi-bin/wiki.pl?Troubl..._t_run_missing_lapic

The following user(s) said Thank You: TAREQ_BELAL

Please Log in or Create an account to join the conversation.

TAREQ_BELAL
Offline
New Member

30 Oct 2012 20:27 #26062 by TAREQ_BELAL

Replied by TAREQ_BELAL on topic HP-copaq NC8000

Hi

I will try to inable APIC

but i want to inform you that i have another HDD with UBUNTU 8.04 and i'v updated EMC2 v2.3 to Linuxcnc 2.5.1 and it is working fine on the same machine

Please Log in or Create an account to join the conversation.

TAREQ_BELAL
Offline
New Member

30 Oct 2012 20:58 #26065 by TAREQ_BELAL

Replied by TAREQ_BELAL on topic HP-copaq NC8000

Hi

i red the instructions and updated grub

and the linuxcnc started good now

thanks to everyone

Please Log in or Create an account to join the conversation.

ArcEye
Offline
Junior Member

31 Oct 2012 13:57 #26117 by ArcEye

Replied by ArcEye on topic HP-copaq NC8000

but i want to inform you that i have another HDD with UBUNTU 8.04 and i'v updated EMC2 v2.3 to Linuxcnc 2.5.1 and it is working fine on the same machine

Unfortunately this 'feature' came in with 10.04.
8.04 was unaffected, other than occassionally requiring APIC to be disabled if already enabled

The following user(s) said Thank You: TAREQ_BELAL

Please Log in or Create an account to join the conversation.

Time to create page: 0.062 seconds