Forum Menu

Plasmac parport connections

More
7 years 3 months ago - 7 years 3 months ago #139390 by phoenix
Replied by phoenix on topic Plasmac parport connections
Well ok i have a machine named my mill i run configrator and enter the following
Arc voltage hal pin pin 11 in
Float sw 10 in
Is this right????
In hal I chose mymill. Hal
Last edit: 7 years 3 months ago by phoenix.

Please Log in or Create an account to join the conversation.

More
7 years 3 months ago #139392 by phoenix
Replied by phoenix on topic Plasmac parport connections
Also i m unable to share pics due to high quality of my mob camera....
Admin is great
Waht the hell i need to type inside arc voltage hal pin and float sw hal pin

Please Log in or Create an account to join the conversation.

More
7 years 3 months ago #139393 by phoenix
Replied by phoenix on topic Plasmac parport connections
You are blaming me for posting continuesly
But thats why forums are made to discuss knowledge amd NOW I'M NOT GONNA STOP UNTIL I GET MY ANSWER

Please Log in or Create an account to join the conversation.

More
7 years 3 months ago #139394 by phillc54
Replied by phillc54 on topic Plasmac parport connections
For the float switch enter the hal name of the parport pin you have connected the float switch to.
What are you using to sample the arc voltage?

Please Log in or Create an account to join the conversation.

More
7 years 3 months ago #139395 by phoenix
Replied by phoenix on topic Plasmac parport connections
I'm gona give friquency input to in
What you mean by hal name of parport pin i entered parport. 0.pin-n-out
Is it right???

Please Log in or Create an account to join the conversation.

More
7 years 3 months ago #139397 by phoenix
Replied by phoenix on topic Plasmac parport connections
I did as u said its giving an errro
Can not find - sec task - var task - num 1
And thanks to admin i cant post any pics

Please Log in or Create an account to join the conversation.

Time to create page: 0.065 seconds
Powered by Kunena Forum