Converting an old DMU 50, where to start?
- ihavenofish
- Offline
- Platinum Member
-
Less
More
- Posts: 719
- Thank you received: 142
29 Nov 2021 23:48 #227960
by ihavenofish
Replied by ihavenofish on topic Converting an old DMU 50, where to start?
other way round. the 7i94 is the "master" with the ethernet port.
Please Log in or Create an account to join the conversation.
- Henk
- Offline
- Platinum Member
-
Less
More
- Posts: 395
- Thank you received: 80
30 Nov 2021 04:26 #227977
by Henk
Replied by Henk on topic Converting an old DMU 50, where to start?
Mesa can provide the connecting cable for that or you can make up your own. The pin out is in the manuals.
I use a ribbon cable and I mount the boards close together. The 26th pin on the idc is not used.
I use a ribbon cable and I mount the boards close together. The 26th pin on the idc is not used.
Please Log in or Create an account to join the conversation.
- charlieLedezma
-
- Offline
- New Member
-
Less
More
- Posts: 5
- Thank you received: 0
06 Jun 2024 08:20 #302446
by charlieLedezma
Replied by charlieLedezma on topic Converting an old DMU 50, where to start?
Hello, I would like to know if you managed to do this retrofit without changing the original drivers ? Could you update us ?
Please Log in or Create an account to join the conversation.
Time to create page: 0.072 seconds