carousel.comp - jog-FWD still an issue
04 Oct 2023 15:29 #282295
by andypugh
Replied by andypugh on topic carousel.comp - jog-FWD still an issue
I have fixed the jog behaviour in counts mode.
github.com/LinuxCNC/linuxcnc/compare/master...2.9
And closed this issue
github.com/LinuxCNC/linuxcnc/issues/2300
github.com/LinuxCNC/linuxcnc/compare/master...2.9
And closed this issue
github.com/LinuxCNC/linuxcnc/issues/2300
The following user(s) said Thank You: tommylight, spumco
Please Log in or Create an account to join the conversation.
04 Oct 2023 23:55 #282327
by spumco
Replied by spumco on topic carousel.comp - jog-FWD still an issue
Thank you Andy.
I'll test it out shortly and report back.
I'll test it out shortly and report back.
Please Log in or Create an account to join the conversation.
Time to create page: 0.607 seconds