pncconfig error

5 years 11 months ago #188455 by PCW

Replied by PCW on topic pncconfig error

You may need to install mesaflash on your system

github.com/LinuxCNC/mesaflash

Bottom of page has install instructions

Please Log in or Create an account to join the conversation.

5 years 11 months ago #188461 by kevin19

Replied by kevin19 on topic pncconfig error

thank you, this is what i get when i do mesaflash:

Please Log in or Create an account to join the conversation.

5 years 11 months ago #188462 by PCW

Replied by PCW on topic pncconfig error

OK that's 7I77 firmware

For a 7I75 I would probably choose firmware with stepgens but no SSerial like 5i25_g540x2.bit

Please Log in or Create an account to join the conversation.

5 years 11 months ago #188464 by kevin19

Replied by kevin19 on topic pncconfig error

I didn't get,so which firmware shall I chose in the config?

Attachments:

Please Log in or Create an account to join the conversation.

5 years 11 months ago #188465 by PCW

Replied by PCW on topic pncconfig error

g540x2

The following user(s) said Thank You: kevin19

Please Log in or Create an account to join the conversation.

5 years 11 months ago #188466 by kevin19

Replied by kevin19 on topic pncconfig error

I changed the firmware but I do still get an error...

Attachments:

Please Log in or Create an account to join the conversation.

Moderators: cmorley

Time to create page: 0.155 seconds