Re:pncconf - feature requests

cmorley
Offline
Moderator

14 years 8 months ago #17999 by cmorley

Replied by cmorley on topic Re:pncconf - feature requests

not sure if its a typo but Johns quote has 5125 instead of 5i25.

Please Log in or Create an account to join the conversation.

PCW
Offline
Moderator

14 years 8 months ago #18000 by PCW

Replied by PCW on topic Re:pncconf - feature requests

Sure looks like the name in the hal setp line is wrong, whatever the cause...

Please Log in or Create an account to join the conversation.

BigJohnT
Offline
Administrator

14 years 8 months ago #18016 by BigJohnT

Replied by BigJohnT on topic Re:pncconf - feature requests

Chris,

Good catch on my typo and the two keys are not even on the same hand!

John

Please Log in or Create an account to join the conversation.

cmorley
Offline
Moderator

14 years 8 months ago #18068 by cmorley

Replied by cmorley on topic Re:pncconf - feature requests

I do it too. 5125 is just more natural

Please Log in or Create an account to join the conversation.

cmorley
Offline
Moderator

14 years 8 months ago #18069 by cmorley

Replied by cmorley on topic Re:pncconf - feature requests

Thank you for the 7i77 pinouts guys.
I assume this is mode 0 . is that the only mode?

Please Log in or Create an account to join the conversation.

BigJohnT
Offline
Administrator

14 years 8 months ago - 14 years 8 months ago #18079 by BigJohnT

Replied by BigJohnT on topic Re:pncconf - feature requests

Yes, it was mode 0, I don't know if others are supported yet... let me see if it blows up.

I'm not sure how to change the mode at this time. I changed the sserial part from 002XXX to 102XXX and it loaded but the pins seem to be the same.

John

Last edit: 14 years 8 months ago by BigJohnT.

Please Log in or Create an account to join the conversation.

Moderators: cmorley

Time to create page: 0.134 seconds