New install of Mesa 7i92 on TCL lathe
25 Apr 2022 16:31 #241218
by john11668
Replied by john11668 on topic New install of Mesa 7i92 on TCL lathe
The point of the previous post was to advise you that things had changed and I now have an internet connection.. And then to check if (as a result ) there was any change in the way forward .
You could have said "all good , proceed as previously instructed " that would have been sufficient
USB to Lan cable connection works without any action in a windows machine . but clearly was not recognised on this one.
I will change mesa jumpers and proceed from there.
You could have said "all good , proceed as previously instructed " that would have been sufficient
USB to Lan cable connection works without any action in a windows machine . but clearly was not recognised on this one.
I will change mesa jumpers and proceed from there.
Please Log in or Create an account to join the conversation.
26 Apr 2022 07:40 #241264
by rodw
Replied by rodw on topic New install of Mesa 7i92 on TCL lathe
If you are not familiar with networking design, this video I did with a mesa card may be worth watching. BOUt 16 minutes in we go through all of the networking basics you need to know where you have 2 Network connecctions (mesa and your router)
Please Log in or Create an account to join the conversation.
26 Apr 2022 19:42 #241323
by john11668
Replied by john11668 on topic New install of Mesa 7i92 on TCL lathe
Sorry Rodw but I did not really find that useful. Too much info to wade through to get to what was relevant .
Found what I needed elsewhere .
Found what I needed elsewhere .
Please Log in or Create an account to join the conversation.
- ALittleOffTheRails
- Offline
- User is blocked
Less
More
- Posts: 247
- Thank you received: 65
27 Apr 2022 03:51 #241350
by ALittleOffTheRails
Replied by ALittleOffTheRails on topic New install of Mesa 7i92 on TCL lathe
That's great John, be sure to return to your alternative source for any other issues you have.
So sorry that the best part of 11 pages did not provide useful.
So sorry that the best part of 11 pages did not provide useful.
Please Log in or Create an account to join the conversation.
27 Apr 2022 08:32 #241361
by john11668
Replied by john11668 on topic New install of Mesa 7i92 on TCL lathe
I was referring purely to Rodw's video not the prior 11 pages
Please Log in or Create an account to join the conversation.
Moderators: cmorley
Time to create page: 0.169 seconds