LinuxCNC 2.9 RPi - PNCconf error

mor
Offline
Junior Member

3 years 7 months ago #267750 by mor

Replied by mor on topic LinuxCNC 2.9 RPi - PNCconf error

image missing /media/kunena/emoticons/blink.png Was trying to figure out how to upload an image. Then saw the big "Attachments" button. Braindead right now.

Please Log in or Create an account to join the conversation.

phillc54
Offline
Platinum Member

3 years 7 months ago #267752 by phillc54

Replied by phillc54 on topic LinuxCNC 2.9 RPi - PNCconf error

While waiting for my RPI to update I ran PNCconf to the end and noticed this error if I selected a 7i96s:

Warning: Spoiler!

I don't see that if I select a 7i96.

Please Log in or Create an account to join the conversation.

mor
Offline
Junior Member

3 years 7 months ago #267753 by mor

Replied by mor on topic LinuxCNC 2.9 RPi - PNCconf error

I get the error before the Mesa page; see above post with attached image.

Please Log in or Create an account to join the conversation.

cmorley
Offline
Moderator

3 years 7 months ago #267755 by cmorley

Replied by cmorley on topic LinuxCNC 2.9 RPi - PNCconf error

Ok I see the serial port entry is not filled.
let me look into that.

The following user(s) said Thank You: mor

Please Log in or Create an account to join the conversation.

cmorley
Offline
Moderator

3 years 7 months ago #267757 by cmorley

Replied by cmorley on topic LinuxCNC 2.9 RPi - PNCconf error

in src/emc/usr_intf/pncconf/pages.py

modify the function to this:

Code:

    def search_for_serial_device_name(self):
        match = os.popen("""ls /sys/class/tty/*/device/driver | grep 'driver' | cut -d "/" -f 5""").read().split()
        if len(match) <1: return
        model = self.w.gs2_vfd_device_name.get_model()
        model.clear()
        for item in match:
            name = '/dev/%s'%item
            model.append((name,))

Please Log in or Create an account to join the conversation.

mor
Offline
Junior Member

3 years 7 months ago #267758 by mor

Replied by mor on topic LinuxCNC 2.9 RPi - PNCconf error

I made the changes, do I need to rebuild everything? Sorry if this is a n00b question.

Please Log in or Create an account to join the conversation.

Moderators: cmorley

Time to create page: 0.158 seconds

Forum Menu

LinuxCNC 2.9 RPi - PNCconf error