No Start on Linuxcnc 2.7.14 and 7i76e
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19209
- Thank you received: 6438
07 Nov 2019 21:49 #149885
by tommylight
Replied by tommylight on topic No Start on Linuxcnc 2.7.14 and 7i76e
You are welcomed, always.ahh yes I see it - thanks
Please Log in or Create an account to join the conversation.
- Todd Zuercher
-
- Offline
- Platinum Member
-
Less
More
- Posts: 5007
- Thank you received: 1441
07 Nov 2019 21:55 #149887
by Todd Zuercher
Replied by Todd Zuercher on topic No Start on Linuxcnc 2.7.14 and 7i76e
You might have better luck starting with the Linuxcnc ISO from here.
www.linuxcnc.org/testing-stretch-rtpreem...tch-uspace-amd64.iso
It is Debian 9 with Linuxcnc already installed.
www.linuxcnc.org/testing-stretch-rtpreem...tch-uspace-amd64.iso
It is Debian 9 with Linuxcnc already installed.
Please Log in or Create an account to join the conversation.
08 Mar 2020 10:42 #159464
by +Jan+
Replied by +Jan+ on topic No Start on Linuxcnc 2.7.14 and 7i76e
Sorry for the late feedback. You were right, after the reinstallation everything works as desired. Thanks a lot...
Please Log in or Create an account to join the conversation.
Time to create page: 0.062 seconds