Weird homing behavior. Y+Y2 out of sync

@AJ Please tell what branch you are using
and how and when it was last updated.

If you are using recent master branch, (after 2may22)
my recent commit may have caused this bad behavior.

Ref:
github.com/LinuxCNC/linuxcnc/commit/e5be0730d1c
 

Yeah, slowing down the video does show everything, thank you Andy and Snowwy.
Also thank you Dgarret for always jumping in when we need you.

Yes Andy, final moves do happen separately and I cannot have HOME_POSITION any further without breaking the gantry...
I had a go with Halscope today but no luck. Need a bit more time to get my head round on how it works. Will have another go tomorrow

snowgoer540,
I have wired the sensors without any particular order. I thought it would not matter?

As for
max-x (input 004)
min-y (input 005)
my thinking was that if anything would go wrong, these sensors would stop the machine before crashing. Are you saying these are obsolete and can be removed?

Repeating question:

@AJ Please tell what branch you are using
and how and when it was last updated.

If you are using recent master branch, (after 2may22)
my recent commit may have caused this bad behavior.

 @AJ Please tell what branch you are using
and how and when it was last updated.

If you are using recent master branch, (after 2may22)
my recent commit may have caused this bad behavior.
 

dgarret,
I have updated LinuxCNC very recently, couple days ago. I'm using version LinuxCNC v2.9.0 QtPlasmaC v1.223.187