Forum Menu

First Time Builder - Stuck

More
6 years 9 months ago #155386 by phillc54
Replied by phillc54 on topic First Time Builder - Stuck
That is good, you can use Pncconf for a 7i96

Please Log in or Create an account to join the conversation.

More
6 years 9 months ago #155396 by dzawacki
Replied by dzawacki on topic First Time Builder - Stuck
Does anyone know where there is a good tutorial for configuring using Pncconf for a 7i96? I ran through the config process and only set a few of the options and got the following error message:
Code:
PNCconf encountered an error. The following information may be useful in troubleshooting: LinuxCNC Version: UNAVAILABLE Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/pncconf/pages.py", line 1145, in on_xaxistune_clicked def on_xaxistune_clicked(self, *args): self.t.tune_axis('x') File "/usr/lib/python2.7/dist-packages/pncconf/tests.py", line 679, in tune_axis halrun.write("setp "+i+".invert_output true\n") TypeError: cannot concatenate 'str' and 'list' objects

Please Log in or Create an account to join the conversation.

More
6 years 9 months ago #155397 by cmorley
Replied by cmorley on topic First Time Builder - Stuck
Oops that's an error I introduced from changes I made to invert pins ... i'll look into shortly - sorry Skip the tune test for now.

Chris

Please Log in or Create an account to join the conversation.

More
6 years 9 months ago #155400 by cmorley
Replied by cmorley on topic First Time Builder - Stuck
I pushed a fix for this - should be available as an update in a few hours.
Chris
The following user(s) said Thank You: dzawacki

Please Log in or Create an account to join the conversation.

More
6 years 9 months ago #155402 by AgentWD40
Replied by AgentWD40 on topic First Time Builder - Stuck

dzawacki wrote: Does anyone know where there is a good tutorial for configuring using Pncconf for a 7i96? I ran through the config process and only set a few of the options and got the following error message:


A good one? None that I know of. But here's a bare bones walkthrough of setting up a 7i96 tailored to a simple machine. Lots of babbling and grammar issues but maybe it'll be helpful forum.v1engineering.com/t/lowrider2-plas...ild/13939/6?u=kd2018
The following user(s) said Thank You: dzawacki

Please Log in or Create an account to join the conversation.

More
6 years 9 months ago #155427 by dzawacki
Replied by dzawacki on topic First Time Builder - Stuck

cmorley wrote: I pushed a fix for this - should be available as an update in a few hours.
Chris


Well that's better than I could have hoped for! It wasn't me, and you were able to fix it quickly. Thank you!

I'll update this evening and give it another go.

Please Log in or Create an account to join the conversation.

Time to create page: 0.113 seconds
Powered by Kunena Forum