LinuxCNC on Raspberry Pi 4

More
17 Jan 2023 02:06 #262206 by cakeslob
Replied by cakeslob on topic LinuxCNC on Raspberry Pi 4
Hey Danny, in your config.txt , try changing your graphics driver from kms to fkms
That was the issue for me at least, when my always rpi screen didnt work with a new image.

dtoverlay=vc4-fkms-v3d

Please Log in or Create an account to join the conversation.

More
17 Jan 2023 04:08 #262212 by dannym
Replied by dannym on topic LinuxCNC on Raspberry Pi 4
Hmmm... ok, that made it WORK on the Onn monitor. But the Motorola HDMI docking station just went dead. No-signal instead of a slanted screen.

Please Log in or Create an account to join the conversation.

Time to create page: 0.064 seconds
Powered by Kunena Forum