Forum Menu

Linux_Mint_22.1_LinuxCNC_2.10.iso

More
1 year 7 months ago #325294 by scotth
Replied by scotth on topic Linux_Mint_22.1_LinuxCNC_2.10.iso
The download still claims 2.10 rather than 2.13.

Please Log in or Create an account to join the conversation.

More
1 year 7 months ago #325295 by tommylight
Replied by tommylight on topic Linux_Mint_22.1_LinuxCNC_2.10.iso
Kernel is changed from 6.10.nn to 6.13.nn.
LinuxCNC is still the same 2.10 version, there is no "2.13" version of it.
I have not updated the download yet, only i after i do over 10 successful installs.
The following user(s) said Thank You: scotth

Please Log in or Create an account to join the conversation.

More
1 year 6 months ago #325680 by tommylight
Replied by tommylight on topic Linux_Mint_22.1_LinuxCNC_2.10.iso
Will try to upload the new build with 6.13 RT kernel later tonight, WiFi works on both of my laptops with it, whereas it did not work with 6.10.
Also, display refresh rate was 60Hz max with 6.10, with 6.13 it's 120Hz as it should.

Please Log in or Create an account to join the conversation.

More
1 year 6 months ago #325784 by tommylight
Replied by tommylight on topic Linux_Mint_22.1_LinuxCNC_2.10.iso
Link on the original post updated with the new version with 6.13 RT kernel.

Please Log in or Create an account to join the conversation.

More
1 year 6 months ago #325816 by scotth
Replied by scotth on topic Linux_Mint_22.1_LinuxCNC_2.10.iso
I'm having a problem, it wants me to log in to the drive.

 

 

Please Log in or Create an account to join the conversation.

More
1 year 6 months ago #325822 by tommylight
Replied by tommylight on topic Linux_Mint_22.1_LinuxCNC_2.10.iso
Should be fixed now.
Sorry.
The following user(s) said Thank You: scotth

Please Log in or Create an account to join the conversation.

Time to create page: 0.474 seconds
Powered by Kunena Forum