Forum Menu

gmocappy clock

More
2 years 11 months ago #286720 by HansU
Replied by HansU on topic gmocappy clock
Did you convert it using an online converter?

Please Log in or Create an account to join the conversation.

More
2 years 11 months ago #286730 by Serg452
Replied by Serg452 on topic gmocappy clock
I tried online, but it didn't work out. Widget appears, but there are no values in the fields

Please Log in or Create an account to join the conversation.

More
2 years 11 months ago #286814 by HansU
Replied by HansU on topic gmocappy clock
Ok I thought you have posted the python3 version, but you only used the new icon theme for LinuxCNC 2.8, so I was a bit irritated.

Please Log in or Create an account to join the conversation.

More
2 years 11 months ago #286821 by Serg452
Replied by Serg452 on topic gmocappy clock

Ok I thought you have posted the python3 version, but you only used the new icon theme for LinuxCNC 2.8, so I was a bit irritated.
 
Excuse me for upsetting you, my english is too bad. On the contrary, I asked for the help of the community. I converted vers probe screen for 2.9 and now I'm testing, but I can't beat the timer.

Please Log in or Create an account to join the conversation.

More
2 years 11 months ago - 2 years 11 months ago #286868 by HansU
Replied by HansU on topic gmocappy clock
I did a quick conversion for usage with LinuxCNC 2.9 (Python 3).
But only a very quick one - the setting of the theme is not converted yet

Code:
EMBED_TAB_NAME = counter EMBED_TAB_COMMAND = gladevcp -x {XID} -u counter.py counter.glade EMBED_TAB_LOCATION =box_custom_4
Last edit: 2 years 11 months ago by HansU.
The following user(s) said Thank You: besriworld, Serg452

Please Log in or Create an account to join the conversation.

More
2 years 11 months ago #286871 by Serg452
Replied by Serg452 on topic gmocappy clock
thank you so much, works!

Please Log in or Create an account to join the conversation.

Moderators: newbynobi, HansU
Time to create page: 0.360 seconds
Powered by Kunena Forum