gmocappy clock

Does this work with linuxcnc v2.9.3 ? I am trying to add this timer.But the panel is not created. After starting the program, linuxcnc creates the necessary file to store the times . am i doing something wrong or are there new files for this version

Start LinuxCNC from terminal and watch for the output, you might see errors.

Norbert

For some reason, the pins are not being created.

net machine timer_4.machine_on <= halui.machine.is-on
net spindle timer_4.spindle_on <= halui.spindle.0.is-on
net running timer_4.running <= halui.program.is-running

After I commented them out, the program started, and I have a timer.

I am attaching edited python file to run on version linuxcnc v2.9.3  .Now, the color of the panel will automatically align with the color specified in the GUI settings.
in .ini file put
EMBED_TAB_NAME = timer
EMBED_TAB_LOCATION = box_custom_4
EMBED_TAB_COMMAND = gladevcp -x {XID} -u timer_hu.py -H timer_4.hal timer_4.glade



 


 

Hello! Please post again counter.clp, counter.glade, counter.hal because at me dont work.Thank you

Try that one:  www.forum.linuxcnc.org/gmoccapy/40709-gm...lock?start=70#286868