Oxy/Fuel table

More
10 Dec 2018 14:58 #122139 by w4swasey
Replied by w4swasey on topic Oxy/Fuel table

Ok

Please find attached modified post.

G64 sets the tracking tolerance for your moves, if you don't use it you will get rounded corners because the feed rate won't slow for corners, the line from your post is:

G64 P0.010 Q0.001 (tracking tolerances set to 0.01)

John


Thank you.... Hopefully I'll get a chance to try it later today. Looking like most of my day is going to be gobbled up in the machine shop

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.076 seconds
Powered by Kunena Forum