Forum Menu

Configuring Plasmac - a complete THC/plasma config for any hardware

More
7 years 5 months ago - 7 years 5 months ago #134451 by billykid
Replied by billykid on topic Configuring Plasmac - a complete THC/plasma config for any hardware
thank you Rod, but I was referring to the 0 - 1 - 2 mode of plasmac .. in practice with or without an external arc-ok signal

edit
sorry i just saw a page 2 that you say use mode 1
Last edit: 7 years 5 months ago by billykid.
The following user(s) said Thank You: rodw

Please Log in or Create an account to join the conversation.

More
7 years 5 months ago #134646 by tommylight
Replied by tommylight on topic Configuring Plasmac - a complete THC/plasma config for any hardware
Yup that should be it, although you have the possibility of having ArcOK generated from linuxcnc.
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc
The following user(s) said Thank You: billykid

Please Log in or Create an account to join the conversation.

More
7 years 5 months ago #134682 by billykid
Replied by billykid on topic Configuring Plasmac - a complete THC/plasma config for any hardware
thank you ,
anyway they advised me to use mode 1 with thcad and since I already have the sensor I did so

Please Log in or Create an account to join the conversation.

More
7 years 3 months ago #139082 by phoenix
Replied by phoenix on topic Configuring Plasmac - a complete THC/plasma config for any hardware
I want reverse run where can i get it

Please Log in or Create an account to join the conversation.

More
7 years 3 months ago #139083 by phillc54
Replied by phillc54 on topic Configuring Plasmac - a complete THC/plasma config for any hardware
Why do you insist on multiple posts for the same question, it is really annoying...
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
7 years 3 months ago #139268 by snugglylovemuffin
Replied by snugglylovemuffin on topic Configuring Plasmac - a complete THC/plasma config for any hardware
I'm trying to clone this but she doesn't chooch.
github.com/phillc54/linuxcnc-plasmac/

Do you have an updated Git link?

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.288 seconds
Powered by Kunena Forum