Mint 19.2 update
- billykid
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 507
- Thank you received: 79
12 Sep 2020 18:27 #181908
by billykid
Mint 19.2 update was created by billykid
After a long time I have updated mint 19.2 plasmac. I have set up the BeagleBrainz repositories and updated but lcnc no longer starts.
I am attaching the error file if you can help me.
Thanks in advance
Mauro
I am attaching the error file if you can help me.
Thanks in advance
Mauro
Please Log in or Create an account to join the conversation.
- snowgoer540
-
- Offline
- Moderator
-
Less
More
- Posts: 2405
- Thank you received: 790
12 Sep 2020 18:30 #181909
by snowgoer540
Replied by snowgoer540 on topic Mint 19.2 update
Can you post your <machine_name>.ini, <machine_name>.hal, <machine_name>_connections.hal files please?After a long time I have updated mint 19.2 plasmac. I have set up the BeagleBrainz repositories and updated but lcnc no longer starts.
I am attaching the error file if you can help me.
Thanks in advance
Mauro
Please Log in or Create an account to join the conversation.
- billykid
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 507
- Thank you received: 79
12 Sep 2020 18:43 - 12 Sep 2020 18:46 #181910
by billykid
Replied by billykid on topic Mint 19.2 update
here they are
With these files everything worked before updating .. but I have an ssd copy
With these files everything worked before updating .. but I have an ssd copy
Last edit: 12 Sep 2020 18:46 by billykid.
Please Log in or Create an account to join the conversation.
- BeagleBrainz
-
- Visitor
-
12 Sep 2020 18:49 #181911
by BeagleBrainz
Replied by BeagleBrainz on topic Mint 19.2 update
That isn't the most recent version in my repo.
When did you setup the repos ?
Have you updated the key from the keyserver as that has changed.
All the ~pre1 packages are no longer in the repo, only the 2.8.0 release is there.
LINUXCNCVERSION: 2.8.0
LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp
LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples
REALTIME: /etc/init.d/realtime
RTS: uspace
HALLIB_DIR: /usr/share/linuxcnc/hallib
dpkg -l '*linuxcnc*':
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-===================-============================-============-=====================================================================
un linuxcnc <none> <none> (no description available)
ii linuxcnc-build-deps 1:2.8.0~pre1.6143.gcea561bf1 all build-dependencies for linuxcnc
un linuxcnc-dev <none> <none> (no description available)
un linuxcnc-doc <none> <none> (no description available)
ii linuxcnc-doc-en 1:2.8.0 all motion controller for CNC machines and robots (English documentation)
un linuxcnc-sim <none> <none> (no description available)
un linuxcnc-sim-dev <none> <none> (no description available)
ii linuxcnc-uspace 1:2.8.0 amd64 motion controller for CNC machines and robots
ii linuxcnc-uspace-dev 1:2.8.0 amd64 PC based motion controller for real-time LinuxWhen did you setup the repos ?
Have you updated the key from the keyserver as that has changed.
All the ~pre1 packages are no longer in the repo, only the 2.8.0 release is there.
Please Log in or Create an account to join the conversation.
- billykid
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 507
- Thank you received: 79
12 Sep 2020 19:55 - 12 Sep 2020 20:02 #181922
by billykid
Replied by billykid on topic Mint 19.2 update
I used these .. I'll try again tomorrow calmly.
strange that it gives an error like i386 but it is 64 bit
Import the key:
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys C9F836336AAD909E
Add the source:
sudo add-apt-repository 'deb cnc.beaglebrainz.net/mintcnc/ bionic 2.8-rtpreempt'
strange that it gives an error like i386 but it is 64 bit
Import the key:
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys C9F836336AAD909E
Add the source:
sudo add-apt-repository 'deb cnc.beaglebrainz.net/mintcnc/ bionic 2.8-rtpreempt'
Last edit: 12 Sep 2020 20:02 by billykid.
Please Log in or Create an account to join the conversation.
- BeagleBrainz
-
- Visitor
-
12 Sep 2020 22:37 #181942
by BeagleBrainz
Replied by BeagleBrainz on topic Mint 19.2 update
The packages on my repo are all 64 bit.
Aptget update will mention that there are no 32 bit packages
The repo is good for 64 bit, I test it to make sure it works.
Aptget update will mention that there are no 32 bit packages
The repo is good for 64 bit, I test it to make sure it works.
Please Log in or Create an account to join the conversation.
- billykid
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 507
- Thank you received: 79
13 Sep 2020 06:25 #181981
by billykid
Replied by billykid on topic Mint 19.2 update
Weird because my system looks like 64-bit.
here are my data.
thanks for your interest
here are my data.
thanks for your interest
Please Log in or Create an account to join the conversation.
- BeagleBrainz
-
- Visitor
-
13 Sep 2020 06:37 #181982
by BeagleBrainz
Replied by BeagleBrainz on topic Mint 19.2 update
If this is the messageAll that it is saying is that the repo doesn't support i386 and as you are on a 64 bit system, as that is what the kernel is, it is not an issue.
So you are good to update. I did it on my main machine last night.
N: Skipping acquire of configured file '2.8-rtpreempt/binary-i386/Packages' as repository 'http://cnc.beaglebrainz.net/mintcnc bionic InRelease' doesn't support architecture 'i386'So you are good to update. I did it on my main machine last night.
Please Log in or Create an account to join the conversation.
- phillc54
-
- Away
- Platinum Member
-
Less
More
- Posts: 5719
- Thank you received: 2093
13 Sep 2020 06:37 #181983
by phillc54
Replied by phillc54 on topic Mint 19.2 update
This Unicode error from Axis may point to a translation error:
It may be worthwhile asking on the Users List:
sourceforge.net/projects/emc/lists/emc-users
Traceback (most recent call last):
File "/usr/bin/axis", line 3571, in <module>
print _("\nNote:\nIndividual axis homing is not currently supported for")
UnicodeEncodeError: 'ascii' codec can't encode character u'\xe8' in position 40: ordinal not in range(128)It may be worthwhile asking on the Users List:
sourceforge.net/projects/emc/lists/emc-users
The following user(s) said Thank You: billykid, BeagleBrainz
Please Log in or Create an account to join the conversation.
- billykid
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 507
- Thank you received: 79
13 Sep 2020 07:34 #181984
by billykid
Replied by billykid on topic Mint 19.2 update
i did it soon .. i put us language and it works fine. maybe then I'll try to solve but it's not too important.
thanks to you
thanks to you
Please Log in or Create an account to join the conversation.
Moderators: snowgoer540
Time to create page: 0.124 seconds