Probe Basic Rack based ATC
25 Nov 2023 21:15 #286500
by udoS
Replied by udoS on topic Probe Basic Rack based ATC
So here you have it; Probe-Basic ..
ATC Rack 5 Positions ToolLengthSensor;
L.G. udoS
ATC Rack 5 Positions ToolLengthSensor;
L.G. udoS
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
- Connor9220
-
- Offline
- Junior Member
-
Less
More
- Posts: 21
- Thank you received: 2
25 Nov 2023 22:21 #286505
by Connor9220
Replied by Connor9220 on topic Probe Basic Rack based ATC
Looks Good! You have files to share? Quick note: After you deposit a tool in the pocket, you can save a bit of time by simply moving left/right without having to move forward and back. But only after you've dropped the tool. Looking to do this for a AVID CNC. Also, what does the ATC screen look like? Or is that still the setup for carousel ?
Please Log in or Create an account to join the conversation.
26 Nov 2023 10:08 #286538
by udoS
Replied by udoS on topic Probe Basic Rack based ATC
@Connor9220
Thanks for the info;
I'm just testing the functions and I try to stay clear of everything;
About the screen: yes , it's still the same Probe-Basic original carousel;
I'm not in python at all so someone else has to do that; That would be nice for now;
But I'm at building a Qt/c++ UI so it's not really one of my priorities;
For me, this is all about interfacing LinuxCNC with a PLC & EtherCAT devices;
L.G. udoS
Thanks for the info;
I'm just testing the functions and I try to stay clear of everything;
About the screen: yes , it's still the same Probe-Basic original carousel;
I'm not in python at all so someone else has to do that; That would be nice for now;
But I'm at building a Qt/c++ UI so it's not really one of my priorities;
For me, this is all about interfacing LinuxCNC with a PLC & EtherCAT devices;
L.G. udoS
Please Log in or Create an account to join the conversation.
Time to create page: 0.092 seconds