Сustomization QTvcp

hottabich
Offline
Platinum Member

4 years 3 months ago #247633 by hottabich

Replied by hottabich on topic Сustomization QTvcp

Error in qtdragon_auto_tool_probe. How to fix it? Thank you!

Attachments:

Please Log in or Create an account to join the conversation.

cmorley
Offline
Moderator

4 years 3 months ago #247636 by cmorley

Replied by cmorley on topic Сustomization QTvcp

looks like it didn't find the stdglue file.
Make sure this:
SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:../../../../nc_files/remap-subroutines:../../../../nc_files/remap_lib

actually points to the require folders.

The following user(s) said Thank You: hottabich

Please Log in or Create an account to join the conversation.

hottabich
Offline
Platinum Member

4 years 3 months ago #247718 by hottabich

Replied by hottabich on topic Сustomization QTvcp

SUBROUTINE_PATH = /home/jura/linuxcnc/nc_files/probe/basic_probe/macros:/home/jura/linuxcnc/nc_files/examples/remap-subroutines:/home/jura/linuxcnc/nc_files/remap_lib. Can't see stdglue.

Attachments:

Please Log in or Create an account to join the conversation.

cmorley
Offline
Moderator

4 years 3 months ago #247742 by cmorley

Replied by cmorley on topic Сustomization QTvcp

try:
/home/jura/linuxcnc/nc_files/remap_lib/python_stdglue

The following user(s) said Thank You: hottabich

Please Log in or Create an account to join the conversation.

hottabich
Offline
Platinum Member

4 years 3 months ago - 4 years 3 months ago #247953 by hottabich

Replied by hottabich on topic Сustomization QTvcp

cmorley wrote:
try:
/home/jura/linuxcnc/nc_files/remap_lib/python_stdglue
It did not help. The error disappears if you replace the stdglue.py file from the bottom up as in the screenshot.
Thank you!

Attachments:

Last edit: 4 years 3 months ago by hottabich.

Please Log in or Create an account to join the conversation.

cmorley
Offline
Moderator

4 years 3 months ago - 4 years 3 months ago #247986 by cmorley

Replied by cmorley on topic Сustomization QTvcp

The problem I think is python_stdglue vrs python-stdglue

But adding the file to the configuration folder works too.

Last edit: 4 years 3 months ago by cmorley.

The following user(s) said Thank You: hottabich

Please Log in or Create an account to join the conversation.

Moderators: cmorley

Time to create page: 0.358 seconds