Search Results (Searched for: )

  • Masiwood123
17 Nov 2025 23:56
Replied by Masiwood123 on topic beta bulleri for retrofit?


now I have to fine-tune the motor, which for now does not vibrate, but only at higher speeds, then connect the spindle and, of course, the racktoolchange (the first time I try it, I hope I can conclude something from the example) thanks for the advice and support
  • Cooped-Up
17 Nov 2025 23:43
Replied by Cooped-Up on topic Maho MH800e Retrofit Project
been having some trouble with getting my 7i73 keyboard matrix to interact with the machine. could be just a me issue, it is currently abouyt 32 degrees f and I cant feel my hands out here. tried searching for answers and gotr some but the buttons dont do anything in either halshow or halscope. I have attached my hal files that involve the matrix.
  • bmoo
17 Nov 2025 23:38
Replied by bmoo on topic Probe Basic Help | G0704 Conversion
Would you recommend just uninstalling probe basic and starting over?
  • abs32
17 Nov 2025 22:12
Replied by abs32 on topic Probe tripped during non-probe move deadlock
Buster.
If you teach how exactly, poke your nose into the "download, enter" type of instructions, then I can. Alas, in this area (patches, sources) I am weaker than in other areas.
While I’m trying to put v2.9.4 on the free partition and even with this there are problems - in the instructions
linuxcnc.org/docs/2.9/html/getting-start...#cha:Installing-RTAI
the required repository is specified with an error, the kernel itself is installed with errors, and For several years now they have forgotten to indicate in the instructions what to do first -

apt-get purge linuxcnc-uspace
apt-get purge linuxcnc-doc*

and then more
apt-get install linuxcnc
  • Autumn Reign
17 Nov 2025 21:47
Replied by Autumn Reign on topic First Machine, can't get 6i25 to drive CL57Y/CL86Y
Yep. That was it. God I do not feel bright. Thanks for the help on this.
  • Autumn Reign
17 Nov 2025 21:42
Replied by Autumn Reign on topic First Machine, can't get 6i25 to drive CL57Y/CL86Y
Yeah. Reviewing my notes its 5i25_7i76x2.

I think I just got something to click looking at these with fresh ideas. on Pncconf under the "Num" column that's not the DB25 pin, but IO number, so when I have my config configured for 7i76x2 and I want I/O 7 for Z Axis Stepgen, my joint3, that's actually Pin 17 on the DB25... I totally thought it was all mapped 1 to 1.
  • andypugh
17 Nov 2025 21:40
Replied by andypugh on topic LinuxCNC 2.10
Currently the master builds are failing:
buildbot2.highlab.com/buildbot/#/grid
And no debs are uploaded if the build fails.

I am not sure what the current problem is, possibly something in the docs.

You could try building from source, it's not particularly difficult.
  • andypugh
17 Nov 2025 21:35
Replied by andypugh on topic Maho MH800e Retrofit Project

You are making good progress. Once you have it all running, I will have to use your HAL and Ini to upgrade my machine to 2.9 
The updater script _should_ handle any necessary HAL changes. 
Not a lot changed between 2.8 and 2.9 (2.7 to 2.8 was the big shift) 

 
  • andypugh
17 Nov 2025 21:31
Replied by andypugh on topic HURCO KMB-1 Control Update
./Hurco_7i92.hal:347: Pin 'encoder.position' does not exist

It's almost certainly encoder.0.position that you need (or some other number that identifies the spindle encoder.
  • andypugh
17 Nov 2025 21:30
Replied by andypugh on topic Probe tripped during non-probe move deadlock
Why do you need 2.8.4?
Are you stuck on Buster (or even Stretch / Jessie?

You could, in principle, patch 2.8.4 with the updates made in 2.9 and recompile.
  • kor
17 Nov 2025 21:27 - 17 Nov 2025 21:28
Replied by kor on topic Ethercat installation from repositories - how to step by step
Hi,
I tried to install the linux-ethercat package
but I get the error that they are dependent on other packages: libtool, autoconf, autoconf-archive and automake. which can not be installed.
I do have a freshly installed linuxcnc 2.9.4 preempt-rt installed from the iso image.
 
  • andypugh
17 Nov 2025 21:26
Replied by andypugh on topic VTK based version of Vismach
It's 52MB on top of a stock Bookworm install.

What was your motivation for doing it? Do you think that others will share that motivation?
  • tommylight
17 Nov 2025 20:35
Replied by tommylight on topic Post installation / problème pour ouvrir des images / Paramétrage de Python ?
Try dmap2gcode from
www.scorchworks.com/Dmap2gcode/dmap2gcode.html
-
The error seems to be dues to uppercase I letter where there should be a lower case letter i, but it seems to be in the software and might require editing the source code and issuing a pull request on GitHub.
  • gardenweazel
17 Nov 2025 20:26
Replied by gardenweazel on topic Rerunning a tool in qt_dragon_hd
What about using the start/from this line? I believe if you do a right-click it allows you to select to start from the line you you right-clicked on. 
  • gardenweazel
17 Nov 2025 20:11
Replied by gardenweazel on topic Motor Driver Electrical Question
Confirming that the 3.8A is a comfortable setting and additionally lowered the heat of the motors.

Thank to everyone that provided feedback!
Displaying 11176 - 11190 out of 11917 results.
Time to create page: 1.149 seconds
Powered by Kunena Forum