PCW wrote:

Do you need the galvo status?

Would be great to have firmware for both option. Thanks for making the firmware!

Are there instructions somewhere for building the firmware for oneself?

www.google.com/search?client=firefox-b-lm&q=rpi+backup+sd+card


And choose your preferred method.

How do I create an image of the contents of one hard drive to install it on another? This is to avoid having to reinstall the additional applications I use with LCN.

Excuse my ignorance, but how do I create an image of the contents of one hard drive to install it on another? This is to avoid having to reinstall the additional applications I use with LCN.

I use Arduino Connector, I really like your project, it's very professional. I don't know if you plan to create matrix-type keyboards to simulate keys or to be used as HAL pins like in Arduino Connector, which gives great flexibility.

Thanks, I had an error in the rules file, that's why that error appeared.

Yes

Do you need the galvo status?
 

Thanks! Yeah getting the firmware for this would be much appreciated

Yes, you can steal 2 Step/Dir channels to support the 4 differential output signals
that XY2-100 needs. If you don't need the status data back from the galvanometer,
that's all that would be required. If you need the galvanometer status, you could
steal 1 of the 7I95T's RS-422 serial port RX pairs

I can make this firmware if needed
 

I’ve been using Probe Basic for a while, and I was wondering if it’s possible to assign keyboard shortcuts to turn the spindle on and off.

Quadrature A,B and Z should be the standard of the ecodrives position signal.
Could you direct me to some knowledge resources or forum threads related to the setup?

If I were to try doing this with just the galvo hooked up to the 7I95T (no other peripheral steppers), would I still need the daughtercards? Also, where would I be able to find the xy2mod firmware needed for the 7I95T? I saw you had one for the 7I96 board, but it seems this cannot act as a drop-in replacement

Yes, if the the drive can output quadrature (A,B,Z) that can connect directly to the 7I97T's encoder inputs
SSI is also possible but would require an additional daughtercard, so quadrature is easier.