Search Results (Searched for: )

  • andrax
26 Jan 2026 17:54
Replied by andrax on topic [solved] XHC-WHB04B-06 rotary knob button feed rate not work
I tested the signals on the rotary control.
The pins for feed.selected light up depending on the selection.
whb.halui.feed-override.scale always remains 0.
whb.halui.max-velocity.value always remains 166.666. 
 
  • cncfreak
26 Jan 2026 16:55 - 26 Jan 2026 17:29
Replied by cncfreak on topic asd-a2-e ... lcec driver?
 

File Attachment:

File Name: ASDA_A2E_2...1-26.xml
File Size:8.62 KB
 

File Attachment:

File Name: Ethercat_slv.txt
File Size:38.5 KB
Use this xml file instead. There are all the ios configured.
Also you have to program on each drive the following:
P2-18 -> 0x0130
P2-19 -> 0x0131
P2-20 -> 0x0132
P2-21 -> 0x0133
P2-22 -> 0x0134
P4-06 -> 0x0000
Or use the attached parameter file if you have the asda-soft.
Rename the *.txt file to *.par
  • tommylight
26 Jan 2026 16:45
Replied by tommylight on topic MAC address not retrieved (after 2 years stop)
Rod asked you to post the result of
Code:
ip a
in a terminal.
  • sataran
26 Jan 2026 16:41
Replied by sataran on topic Bitfile or help – Mesa 6i25 + 7i74 (BiSS-C) + 8i20 + 7i70/7i87
also i have issues accessing the analog and spindle part, don't know if it is linked to the framework or something else.
  • Jocman
26 Jan 2026 16:40
Replied by Jocman on topic MAC address not retrieved (after 2 years stop)
I don't think I've lost the network.
I've selected the pci card to connect to my network (in fact, I can normally access internet).
BTW, this evening (here's almost 6 pm) I hope to make another try (if my wife allow me image missing /media/kunena/emoticons/unsure.png)
  • endian
26 Jan 2026 16:19
Replied by endian on topic LinuxCNC S-Curve Accelerations

Sounds all sensible to me but I really don't feel competent to comment on the proposed path.
I certainly like the structured approach of your initiative, that is something that has been sorely lacking in other attempts.
I think/hope that Rob will be able to give an educated opinion on it and shape it into a concrete roadmap.

Note that Mitsubishi SSCNET requires a servo cycle <= 222us
forum.linuxcnc.org/9-installing-linuxcnc...cnet?start=70#256576
 
defenetly is great to have something faster then 1ms .. ethercat can run at 50us with 16axis but this complex calculations are far slower for now 

I think 250us is very pretty goal (common industrial standard) at any hardware and then reduce it based at used hardware 
  • Mr1576
26 Jan 2026 16:10
Replied by Mr1576 on topic HAL Edits for RS485 / VFD Spindle Control
HAL file (with @andypugh suggestion) attached, as well as current ini file

File Attachment:

File Name: XYYZA2PPTR...1-26.txt
File Size:4.59 KB

File Attachment:

File Name: XYYZA2PPTINI.txt
File Size:3.45 KB
  • Jerry69
26 Jan 2026 15:52
How can I contact juliankoenig87 was created by Jerry69
I am new to this forum. I read a post where he Addis he was retrofitting a Kuhlmann machine with new electronics. I am in United States and have a Kuhlmann with a burnt board and need to get it running again. I think he might can give me some direction.
  • tommylight
26 Jan 2026 15:49
Replied by tommylight on topic Kuhlmann engraving machine upgrade
Upload some pictures of it here, also the electronics box and wiring pictures/PDF anything...
  • tommylight
26 Jan 2026 15:46
Replied by tommylight on topic HAL Edits for RS485 / VFD Spindle Control
No spindle there, attach the hal and ini files here so we can have a look.
  • Mr1576
26 Jan 2026 15:41 - 26 Jan 2026 15:58
Replied by Mr1576 on topic HAL Edits for RS485 / VFD Spindle Control
@meister, thanks.
I can only get linuxcnc top load if I revert to my original HAL, and with your suggestion the results of the grep spindle command are as in the screenshot 
  • tommylight
26 Jan 2026 15:41
Replied by tommylight on topic Question about using Deadband in calibration when switching from Position to Spe
From LinuxCNC documentation:

Still does not explain setting deadband causing a joint error.
  • tommylight
26 Jan 2026 15:39
Replied by tommylight on topic A nice tutorial on using Path workbench included in FreeCAD
I do not think so, and i never tried.
I use strictly Inkscape for plasma machines, it is easy to use and works perfectly fine, except for nesting that requires dividing cuts into layers and groups, so a bit more fiddly and i do not bother with it, it is easier for me to just edit the resulting gcode and move stuff around.
  • Jerry69
26 Jan 2026 15:37
Kuhlmann engraving machine upgrade was created by Jerry69
Hello I am new to this forum, but I have a Kuhlmann Engraver and a board died. I am looking for anyone who has information about converting it with new software and controllers.

 
  • Aciera
26 Jan 2026 15:34 - 26 Jan 2026 16:21
Replied by Aciera on topic LinuxCNC S-Curve Accelerations
Sounds all sensible to me but I really don't feel competent to comment on the proposed path.
I certainly like the structured approach of your initiative, that is something that has been sorely lacking in other attempts.
I think/hope that Rob will be able to give an educated opinion on it and help shape it into a concrete roadmap.

Note that Mitsubishi SSCNET requires a servo cycle <= 222us
forum.linuxcnc.org/9-installing-linuxcnc...cnet?start=70#256576
Displaying 8146 - 8160 out of 11906 results.
Time to create page: 0.216 seconds
Powered by Kunena Forum