Can you post your ini file and preference file if possible?

Hello. I need a breakout board for a Chinese circuit board (Mach3 interface board) 5Axis Breakout Board.

With function mdi and command M66E0L0 the button is disabled while running a program and that doesn't affect its initial functionality. But still hoping there is another way to do that.

By error I mean:

What does LinuxCNC report?

Can you post the complete hal file?

I meant it as an error — I’m not sure how to configure it, what I’m doing wrong, and why the AXIS_A code is written incorrectly. please

Axis works fine, QT dragon also works fine. Its just Probe Basic

2.9.4

I am looking at disable a pushbutton during program runtime. No idea how to do. It is connected to python module, and should not
be enabled during runtime. Is there a setting, it gets greyed out, eg. like mdi-button?

What version of linuxcnc are you using?

There is a version of nativecam in a linuxcnc branch that mostly works.
It's a work in very slow progress. It's based on Qt.
github.com/LinuxCNC/linuxcnc/tree/qt_ncam

There is also another project I've seem on the forum that keeps it gtk based and just updates it to python3 and whatever pygtk is called now.

But I would suggest you just finish what you have built, as it seems you are pretty far along.
You could always convert it to another platform later.

Thanks guys.
I did do:
apt-get update
before I started. 

I just ran it update again to check, and the distro is wheezy. 

I watched Rods video, but don't want to update to LCNC 2.8 or above as I have had a working system, and don't have the time to play around getting it configured again for the joints change, mesa card latency etc.
Cheers,
Mark
 

Mr.Rodw big fan of your work! I wouldnt disagree with that however if there is solution to continue to use ER16 tooling (I should have mentioned that in the og post) then I would rather do that then invest in a TTS spindle and TTS collets. I know there is a solution to this

What is the actual error?