I tried something with your files. This changes made the pins show up, but still many errors displayed in terminal.

I tried something with your files. This changes made the pins show up, but still many errors displayed in terminal.

just found this manual matic pendant, but teensy 4.1 is too expensive ower price board, can i use teensy 2.0 this ? lot lot cheapen, and what need dong encoder or other library, ?not understand english good, need change arduino ide encoder library to new and were have ? i come old teensy 2.0 USB pendant all time only errorrs whit encoder.h
no declare scope etc. i not know what this all mean. not need diplay , only encoder and rotary SW change acis and scale. can move XYZ remote controll. were i found code teensy 2.0 can use. this.

  
Dear
I m trying to configure a 5 axis machine with W axis for the movment of the machine according to the B,C axis anglew move
the linuxcnc start normaly with no errors but the F1,F2  buttons are not working to start the machine
lcnc 2.8.4-1-gb7824717b on w
The machine works with diferent configuration normaly
Any sugestions?

Perfect. Thank you for your help!

update from today.
The same program is running OK today and holes are round.

I have opened, modified and re-saved the Glade file in the newer Glade editor. The Glade file seems to open fine but none of the hal pins created in the handler file show up. But I have no idea how to fix the Python file. I tried running it through 2to3 but it didn't find anything to change. I REALY don't understand Python and I was barely able to make this one sort of work originally. (The fact that most of the included Linuxcnc example config files don't seem to work for similar reasons isn't helping.)

Hi,
(I am having problems with embeding pictures in this forum, I have no idea how to make it display them)

these are two pictures from yesterday ​​​
photos.app.goo.gl/hXtb47Ca2ew7QKCb7
photos.app.goo.gl/KuFkwe33jMVCJ8597

This picture is from one of the precious jobs (no problem here)
photos.app.goo.gl/rgmn2EYY7WZ3vySU6

I also got this today, just as I turned on linuxcnc.
photos.app.goo.gl/3cWeY2jZvieaBWVLA

Cris

 

Well,  LinuxCNC found the card so it does not seem to be an issue
with the PCIE slot or the 6I25 bus interface.

What is the actual error when you have the 7I77 connected?

 

Pncconf is a bit confusing because the num columm contains either channel
numbers (1 digit) or GPIO numbers (3 digits). One main thing to remember
is that you don't really need to care about the pin numbers for the main functions.
as the firmware maps these to the proper pins.

With G540 firmware the stepgens for example are mapped in a logical sequence:

0=G540 X
1=G540 Y
2=G540 Z
3=G540 A

So you just use the channel number "NUM" in pncconf to map the stepgens appropriately

Also you can get a list of G540 function  to channel and GPIO pins with:

sudo measflash --device 5i25 --dbname1 g540 --readhmid

 

hey persei8

i am the guy who messaged on facebook about this

this looks awesome

would be great to set this up on a cnc mill when i get time

cheers

Andrew

You can still use the calculator. The only difference with a THCAD2 and THCAD10/THCAD5 is that it rolls the 2 earlier devices into one and gives you a way to select the full scale range of 10v (THCAD10) or 5 v (THCAD5). So just use the mode that suits your use. Normally you would use a 10 volt full scale for torch voltage

Ive allready tested the last update ...

TP2 and it is working only with simple shapes really well, I did not notice infinity spikes of anything..

no more difficult shaping avaible.. it just froze at cloud of points as G2\G3 transfered to cloud of points .. time spiking increased from last testing

testing only in simulation level ... no real hardware avaible for now

thanks Luca for your job!