ESAB Ultrarex UXD-P 2500 retrofit with Linuxcnc and Proma THC
30 Jul 2020 10:35 #176490
by Sof
Replied by Sof on topic ESAB Ultrarex UXD-P 2500 retrofit with Linuxcnc and Proma THC
If you are available I 'd like to discuss all requirements to get you here and upgrade our machine.
Please Log in or Create an account to join the conversation.
- tommylight
-
Topic Author
- Away
- Moderator
-
Less
More
- Posts: 18337
- Thank you received: 6092
30 Jul 2020 15:22 #176528
by tommylight
Replied by tommylight on topic ESAB Ultrarex UXD-P 2500 retrofit with Linuxcnc and Proma THC
Spending 14 days in quarantine there and 14 days back is no fun at all, plus two full days on the plane during a pandemics makes for some nice horror movies ! ![:) :)](/media/kunena/emoticons/smile.png)
I would love to see Cyprus, but f@#$ chinese messed everything up.
At any rate, here you can find my info:
www.tomberisha.com
![:) :)](/media/kunena/emoticons/smile.png)
I would love to see Cyprus, but f@#$ chinese messed everything up.
At any rate, here you can find my info:
www.tomberisha.com
The following user(s) said Thank You: johnmc1
Please Log in or Create an account to join the conversation.
- my1987toyota
-
- Offline
- Platinum Member
-
Less
More
- Posts: 738
- Thank you received: 292
30 Jul 2020 23:10 #176577
by my1987toyota
Replied by my1987toyota on topic ESAB Ultrarex UXD-P 2500 retrofit with Linuxcnc and Proma THC
Just seen your website if you see smoke signals coming from my direction it's because an experiment didn't quite go as planned.
![:P :P](/media/kunena/emoticons/tongue.png)
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
- tommylight
-
Topic Author
- Away
- Moderator
-
Less
More
- Posts: 18337
- Thank you received: 6092
30 Jul 2020 23:34 #176582
by tommylight
Replied by tommylight on topic ESAB Ultrarex UXD-P 2500 retrofit with Linuxcnc and Proma THC
LOL, i'll keep an eye on it !
![:) :)](/media/kunena/emoticons/smile.png)
Please Log in or Create an account to join the conversation.
- alexandrub
- Offline
- Senior Member
-
Less
More
- Posts: 61
- Thank you received: 5
17 Oct 2020 19:06 #186377
by alexandrub
Replied by alexandrub on topic ESAB Ultrarex UXD-P 2500 retrofit with Linuxcnc and Proma THC
Hello Tommylight, do you know how the old esab makes the probe for z axis with the dc motor? What is the altorithm? I am interested to hnow that.
Thank you.
Thank you.
Please Log in or Create an account to join the conversation.
- tommylight
-
Topic Author
- Away
- Moderator
-
Less
More
- Posts: 18337
- Thank you received: 6092
17 Oct 2020 21:00 #186382
by tommylight
Replied by tommylight on topic ESAB Ultrarex UXD-P 2500 retrofit with Linuxcnc and Proma THC
Mine has sensors on a moving part that holds the torch used for probing and there are two more switches inside the Z axis enclosure for min and max limits.
Please Log in or Create an account to join the conversation.
Time to create page: 0.223 seconds