Deckel Retrofit FP4A

Yes i do. I didnt scan it because i thought it was uneccesarry as i am replacing the old dialog with the mesa cards and all the dialog did was interfacing into the servo drives which i removed and the sps
will upload it in about 5 Hours when i am home from the workshop

Servo Driver Manual for interested people
drive.google.com/file/d/1NzzHhSwe0MWmio7...hg/view?usp=drivesdk

But i noticed that they also support Fancy Modbus over ethernet cable might actually be easier to controll then through that cause you can just connect them together but i dont know how that works

As far as I know you would be the first to get that to work. This comes up every so often but Modbus is not not meant for coordinated movement. LinuxCNC can communicate through modbus but not inside the real time domain. Modbus can be useful for parametrization of the drives though and maybe to get status data from the drives to the PC i.e. current, torque, temperatures or whatever the drives firmware offers.

I was also wondering about MODBUS control of the Lichuan Servo draiver and got informed that this is not a real time capable interface...

forum.linuxcnc.org/26-turning/41498-scha...fit?start=120#201802
Mark

First the missing orange book pages for the conterol co tour 3 and dialog 4:
drive.google.com/file/d/1OG9K_LLbETz8TEi...pd/view?usp=drivesdk

PC Code documentation let me know if i missed a page

drive.google.com/file/d/1OBomj7KGKw3m_GT...-U/view?usp=drivesdk

Oh, this collection is fantastic. If you have the original papers and time for this, i would myself wish an better scan of the pages 19 and 20 from contour pdf. May be with this and a little time we can design our own 11uA Heidenhain scales interface. Instead of using old exe's.