Remora - ethernet NVEM / EC300 / EC500 cnc board

hi Scotta
I wanted to compliment you on the work you have done and made available
to the LinuxCNC community.
I am excited about it and I bought an NVEM V5 to try to install the Remora firmware,
but when I opened the case I noticed that the chip is not an STM32F207 but the one in the photo


 


is it still compatible or did I buy the wrong card?

Thanks if you can give me some advice

P.S. sorry Scotta
I went a bit back with the posts and at 191 there is the answer to my question, thanks,
I'll move on....

Thank you so much for your help, your video helped a lot, I was able to flash on Stlink V2, but how do I install and use pyqcd, I didn't find anything that helped me, I could explain to me, or point someone who has already asked this question to see what He did1

sudo apt install python-pip
sudo python -m pip install -U pyocd
sudo pyocd flash remora-rt1052-3.1.3.bin --target mimxrt1050_quadspi

Hi
I apologize but there are more than 200 posts
I looked through them, I didn't find an answer, maybe I missed it.

I was wondering if the Stlink tool in Debian is suitable for flashing the NVEM V5
if so, I don't know what should be inserted in "Goto address" maybe 0x080000?


 


thanks

Sorry for disturb,i have an problem with my nvem board,is same as board on this topic,im write here but im undestand we are expert on pcb .....when im power on the grren led blink at 10% of light and speed,the item on pcbU7 "DE=G12" is hot and ,the led "D15" blink when insert a cable,the situation of led not change and switch or pc not blink he light.
we have any idea for solve my situation ??
sorry for disturb

A few years ago, I built a HyperCube EVO 3D printer, which still works perfectly to this day.
Thank you!
I accidentally came across this thread and immediately thought that it must be something good. Regarding 3D printers, I have some boards based on an LPC processor. I did a few tests with SPI but gave up because I saw it was a dead end...
I have a question: Which controller is the best to buy at the beginning of 2025? Which one is the fastest and the least problematic?