Remora - ethernet NVEM / EC300 / EC500 cnc board

forum.linuxcnc.org/plasmac/43127-qtplasm...-user-request-enable
forum.linuxcnc.org/plasmac/54940-qtplasmac-estop-stuck
www.forum.linuxcnc.org/38-general-linuxc...plasmac-wont-turn-on

lol its fine, but its going to take a while to get it working 1 error at a time.

Good evening, I tried to follow this tutorial, but I couldn't find the stlink bin file, the DAPLink file no longer exists, I couldn't find it anywhere

This is no longer the recommended method to flash the board. pyOCD has proven to be more reliable.

Use the first part of the video to convert a ST-Link to a CMSIS-DAP probe with the following firmware.

github.com/scottalford75/Remora-NVEM/blo...NVEM-STM32-1.0.0.bin

And then use pyOCD to flash the board as described in this thread.

Should I just download the bim from pyodc and put it in stlink v2 and after that I will be able to record remora on nven? Could you detail me step by step?

hi no you use a stlink (the green one on the video) to flash a second stlink adapter (the blue one on the video), 
then you take the key that you flashed (the blue one) you connect it to a pc and you use PYOCD with the command pyocd flash .\remora-rt1052-3.1.3.bin --target mimxrt1050_quadspi as in the photo


youtube.com/shorts/kLOyWslSZU0?si=C3GMQaH--oAvvTZk