1. Configuring LinuxCNC
  3. HAL
  5. XHC LHB04B-4: fails to detect - SOLVED

XHC LHB04B-4: fails to detect - SOLVED

More
23 Feb 2021 14:05 #199828 by tecno
Replied by tecno on topic XHC LHB04B-4: fails to detect - SOLVED
forum.linuxcnc.org/plasmac/41483-want-to...04-6?start=10#199827

Not working on RPi
pi@pi4-mate:~ $ uname -a
Linux pi4-mate 4.19.71-rt24-v7lrt+ #1 SMP PREEMPT RT Mon May 18 16:17:58 AEST 2020 armv7l GNU/Linux
pi@pi4-mate:~ $

Please Log in or Create an account to join the conversation.

  1. Configuring LinuxCNC
  3. HAL
  5. XHC LHB04B-4: fails to detect - SOLVED
Time to create page: 0.429 seconds
Powered by Kunena Forum