7i96 Configuration Tool

Does this configuration tool be setup to work with RPi4?

Make sure you are in your home directory
cd

Check if you have a file called .xsessionrc (make sure to include the dot)
ls -als .xsessionrc

If not, then
sudo nano .xsessionrc

Then add the contents
if [ -d $HOME/.local/bin ]; then
export PATH="$HOME/.local/bin:$PATH"
fi

Then ctrl x, yes to save
Logout, login, good to go.

I have tried but failed. I move to the home dir that showed just the dir cnc and followed the instructions.
is this correct;-

The terminal was opened from the home dir. I logged out and back in. Then tried to run the config tool with 7i96 in a terminal is this correct.

To see a hidden file (one that starts with a dot) you have to select show hidden files in the file manager.

JT

tecno wrote: Does this configuration tool be setup to work with RPi4?

I've not tried running the configuration tool on the RPi4 but it should just work as they are both debian. I may try today as I got the RPi4 going with preemt rt and LinuxCNC and was working out the details for setting up a static IP needed for the Mesa Ethernet cards.

JT

Looking forward to your test, I am not quite yet there as I am awaiting for the 7i96 to arrive.

Cheers
Bengt

ps I have Hakan's RPi4 on a long loan to evaluate if I can get my PlasmaC to run in my rig.