Question about custom BOB for a 7i92

PCW wrote:

Not sure what you mean by output pin.

 

Ah, sorry that's a bit of a brainfart. Had to look at the stepgen setup to realize they do the exact same thing.

There's probably nothing wrong other than I was expecting to see scale, etc pins where they are actually parameters. That doc actually does say they are parameters, the word "parameters" is just shifted so I didn't notice it.

I missed the too, I'll fix that formatting error when I get a chance.
 

I should be able to just swap that fpga right? Assuming the EEPROM and whatever else is still good.

Yes, there is no non-volatile information stored in the FPGA.