HURCO BMC-20P retrofit

7 years 1 month ago #145655 by tommylight

Replied by tommylight on topic HURCO BMC-20P retrofit

Here is one of the configs i was using while making the toolchanger work.

The following user(s) said Thank You: evengravy, Jake, giz

Please Log in or Create an account to join the conversation.

7 years 1 month ago #145906 by DaOne

Replied by DaOne on topic HURCO BMC-20P retrofit

Thank you tommylight! Really curious if you were able to reuse the Yaskawa servos with the Granite Devices Argon drives?

Please Log in or Create an account to join the conversation.

7 years 1 month ago #145916 by tommylight

Replied by tommylight on topic HURCO BMC-20P retrofit

No you can not use them as they have proprietary encoders, so changing the encoders was a pita!

Please Log in or Create an account to join the conversation.

7 years 1 month ago #145922 by pl7i92

Replied by pl7i92 on topic HURCO BMC-20P retrofit

did you change to the Standard 500ppr or did you upgrade to the 2000ppr as for a mesa this woudt be a good replacement

Please Log in or Create an account to join the conversation.

7 years 1 month ago #145923 by tommylight

Replied by tommylight on topic HURCO BMC-20P retrofit

pl7i92 wrote: did you change to the Standard 500ppr or did you upgrade to the 2000ppr as for a mesa this woudt be a good replacement

Dude, the original was 8192 ppr, replaced by 2500ppr to have 10000 counts .

Please Log in or Create an account to join the conversation.

7 years 1 month ago #145925 by pl7i92

Replied by pl7i92 on topic HURCO BMC-20P retrofit

this is a good value what speed can you go on the Mesa Hardware i guess its a 7i77

Please Log in or Create an account to join the conversation.

Time to create page: 0.394 seconds