Went to 2.5 and now I get 'exceeds maximum' errors
11 Aug 2011 21:49 #12438
by mhaberler
Replied by mhaberler on topic Re:Went to 2.5 and now I get 'exceeds maximum' errors
I think there's a chance the buildbot v2.5_branch package has the fix
see buildbot.linuxcnc.org/dists/lucid/v2.5_b...30a6a0d_i386.changes
buildbot.linuxcnc.org/
-m
see buildbot.linuxcnc.org/dists/lucid/v2.5_b...30a6a0d_i386.changes
buildbot.linuxcnc.org/
-m
Please Log in or Create an account to join the conversation.
11 Aug 2011 22:21 #12439
by BigJohnT
Replied by BigJohnT on topic Re:Went to 2.5 and now I get 'exceeds maximum' errors
Yep there it is in 2.5...
So you could download the 2.5 deb from buildbot, I'm not sure what apt get will do...
John
So you could download the 2.5 deb from buildbot, I'm not sure what apt get will do...
John
Please Log in or Create an account to join the conversation.
- photomankc
- Offline
- Premium Member
-
Less
More
- Posts: 100
- Thank you received: 4
01 Sep 2011 03:02 #12882
by photomankc
Replied by photomankc on topic Re:Went to 2.5 and now I get 'exceeds maximum' errors
Just to top-off the thread, I finally pulled down a new EMC2.5 version via Ubuntu's update manager and it appears that this problem is now gone. Thanks to all for the help in tracking it down as well as the guys that patched it up! Appreciate the community help.
Please Log in or Create an account to join the conversation.
Time to create page: 0.144 seconds