Did that too hehe. All files gone. Luckily it was a new PC so I can redo it.
I mean do it one more time and delete all files again
It's the ./build_cmake_rm that is a bit aggressive.
This is the log of that command, it goes a bit further bit I only include up to the point where things go wrong.
Warning: Spoiler!
+
+
| liblinuxcnchal |
+
+
-- The C compiler identification is GNU 12.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Configuring done
-- Generating done
-- Build files have been written to: /home/debian/src/linuxcnc/cmake/liblinuxcnchal/build
[ 66%] Building C object CMakeFiles/linuxcnchal.dir/home/debian/src/linuxcnc/src/hal/hal_lib.c.o
[ 66%] Building C object CMakeFiles/linuxcnchal.dir/home/debian/src/linuxcnc/src/rtapi/uspace_ulapi.c.o
[100%] Linking C shared library liblinuxcnchal.so
[100%] Built target linuxcnchal
[100%] Built target linuxcnchal
Install the project...
-- Install configuration: "Release"
-- Installing: /home/debian/src/linuxcnc/cmake/liblinuxcnchal/../../lib/liblinuxcnchal.so.0
-- Up-to-date: /home/debian/src/linuxcnc/cmake/liblinuxcnchal/../../lib/liblinuxcnchal.so
+
+
| custom motmod.so |
+
+
-- The CXX compiler identification is GNU 12.2.0
-- The C compiler identification is GNU 12.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Configuring done
-- Generating done
-- Build files have been written to: /home/debian/src/linuxcnc/cmake/libmotion/build
[ 11%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/emc/kinematics/cubic.c.o
[ 23%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/emc/motion/command.c.o
[ 23%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/emc/motion/axis.c.o
[ 23%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/emc/motion/motion.c.o
[ 29%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/emc/motion/control.c.o
[ 35%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/emc/motion/simple_tp.c.o
[ 41%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/emc/motion/emcmotutil.c.o
[ 47%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/emc/motion/stashf.c.o
[ 52%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/emc/motion/dbuf.c.o
[ 58%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/emc/tp/tc.c.o
[ 64%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/emc/tp/tcq.c.o
[ 70%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/emc/tp/spherical_arc.c.o
[ 76%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/emc/tp/blendmath.c.o
[ 82%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/emc/nml_intf/emcpose.c.o
[ 88%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/libnml/posemath/_posemath.c.o
[ 94%] Building C object CMakeFiles/motmod.dir/home/debian/src/linuxcnc/src/libnml/posemath/sincos.c.o
[100%] Linking C shared library motmod.so
[100%] Built target motmod
[100%] Built target motmod
Install the project...
-- Install configuration: "Release"
-- Installing: /home/debian/src/linuxcnc/cmake/libmotion/../../rtlib/motmod.so
+
+
| custom homemod.so |
+
+
-- The CXX compiler identification is GNU 12.2.0
-- The C compiler identification is GNU 12.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Configuring done
-- Generating done
-- Build files have been written to: /home/debian/src/linuxcnc/cmake/libhome/build
[ 66%] Building C object CMakeFiles/homemod.dir/home/debian/src/linuxcnc/src/emc/motion/homemod.c.o
[ 66%] Building C object CMakeFiles/homemod.dir/home/debian/src/linuxcnc/src/emc/motion/homing.c.o
[100%] Linking C shared library homemod.so
[100%] Built target homemod
[100%] Built target homemod
Install the project...
-- Install configuration: "Release"
-- Installing: /home/debian/src/linuxcnc/cmake/libhome/../../rtlib/homemod.so
+
+
| libclothoid3d.so |
+
+
./build_cmake_rm: rad 84: cd: libclothoid3d/src: Filen eller katalogen finns inte
CMake Warning:
Ignoring extra path from command line:
".."
CMake Error: The source directory "/home/debian/src/linuxcnc/cmake" does not appear to contain CMakeLists.txt.
Specify --help for usage, or press the help button on the CMake GUI.
make: *** Inga mål angavs och ingen makefil hittades. Stannar.
make: *** Ingen regel för att skapa målet ”install”. Stannar.
Nope won't work. Well one can't delete files but you can also not create new files or write to files during the build, so the build fails.
The right thing is to fix the build so this doesn't happen.
Got it to build. The install script, as far as I can tell it doesn't bring in libclothoid3d and libscurve
When I did that manually (path here
forum.linuxcnc.org/38-general-linuxcnc-q...orm?start=170#323932
) and copied that to the empty directories the code builds.
I'm trying to run the last update on ethercat drivers but i have this error
HAL: ERROR: function 'cia402.0.read-all' not found
./cia402.hal:34: addf failed
HAL: ERROR: pin 'lcec.0.3.out-01' not found
shutdown.hal:2: unlink failed
24062
24076
