Forum Menu

Maho MH 300 C Retrofit...?

More
8 years 5 months ago #110171 by RotarySMP
Replied by RotarySMP on topic Maho MH 300 C Retrofit...?
Are you certain the Phillips scales are 11µA output? Müllernick converted a 700E which also had Phillips scales, and found his had some non-standard output. Ended up replacing them with modern TLL output scales.

Please Log in or Create an account to join the conversation.

More
8 years 5 months ago #110177 by Fermaq
Replied by Fermaq on topic Maho MH 300 C Retrofit...?
Technician said me that scales was 11µamp...(?:( )

Please Log in or Create an account to join the conversation.

More
8 years 5 months ago #110180 by tecno
Replied by tecno on topic Maho MH 300 C Retrofit...?
Do you have access to oscilloscope to see what the signal looks like?

Please Log in or Create an account to join the conversation.

More
8 years 5 months ago - 8 years 5 months ago #110193 by Fermaq
Replied by Fermaq on topic Maho MH 300 C Retrofit...?
No.
In this monent I do not have time for I see that, now I am work for put Schaubin to worked...
Last edit: 8 years 5 months ago by Fermaq.

Please Log in or Create an account to join the conversation.

More
8 years 5 months ago #110222 by Fermaq
Replied by Fermaq on topic Maho MH 300 C Retrofit...?
Here in Portugal is 00:51 hours.
If I understand, to do the retrofit with MESA 7i77 I will also need 5i25 and linux software for cnc ...? (?) Where or how can I get linux cnc software

Please Log in or Create an account to join the conversation.

More
8 years 5 months ago - 8 years 5 months ago #110223 by bevins
Replied by bevins on topic Maho MH 300 C Retrofit...?
LinuxCNC Download here.
Last edit: 8 years 5 months ago by bevins.

Please Log in or Create an account to join the conversation.

Time to create page: 0.235 seconds
Powered by Kunena Forum