hurco hawk 30 retrofit
- PCW
-
- Offline
- Moderator
-
Less
More
- Posts: 17885
- Thank you received: 4773
21 May 2021 20:03 #209793
by PCW
Replied by PCW on topic hurco hawk 30 retrofit
You would need to verify that no 7I97 output is connected
to any ground on any channel (with an Ohmmeter)
to any ground on any channel (with an Ohmmeter)
Please Log in or Create an account to join the conversation.
- Phos1
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
20 Dec 2021 23:08 #229578
by Phos1
Replied by Phos1 on topic hurco hawk 30 retrofit
Any update on your progress @NEMARIAZ? I have a Hurco Hawk30 that I am considering for a retrofit and would like to know if you have your machine fully functional and if you have any advice. Thx
Please Log in or Create an account to join the conversation.
- NEMARIAZ
- Offline
- Junior Member
-
Less
More
- Posts: 28
- Thank you received: 0
28 Jun 2022 10:25 #246067
by NEMARIAZ
Replied by NEMARIAZ on topic hurco hawk 30 retrofit
Hello Phos1,
Sorry for late reply. Its working fine . You can follow the same MESA configuration as I used . let me know if you need any support . Please post pictures of your machine .
Regards
Sorry for late reply. Its working fine . You can follow the same MESA configuration as I used . let me know if you need any support . Please post pictures of your machine .
Regards
Please Log in or Create an account to join the conversation.
Time to create page: 0.054 seconds