5 axis tilted drilling

I make the changes .Is there somthing else i miss?

""As for the rotary axis not moving I'm somewhat at a loss. As a last resort you might want to create a totally new config using the pncconf tool and modify/add the extra axis manually.""

iI all ready create several configurations in 2.7 and 2.9 versions .The result is always the same:If the axis named C it want work
If the axis named A works perfect (exaclty the same config)

 

iI allready create several configurations in 2.7 and 2.9 versions .The resault is always the same:If the axis named C it want work
If the axis named A works perfekt(exakly the same config)

Really not sure what is going on.
Just as a work around you could try to add an A axis and increase the number of joints to 7 in the ini file and see if that gets the C axis going. 

Also to keep things simple until you get the C axis running you might want to change back to trivial kinematics.

so in your ini file, instead of
KINEMATICS = 5axiskins coordinates=xyzcbw

revert back to

KINEMATICS = trivkins

I assume you have tried jogging the C axis with the '+' and '-' in the axis gui. Or are you trying to jog with the keyboard only?

edit:
Also, have you tried if the C axis works in MDI command?

I assume you have tried jogging the C axis with the '+' and '-' in the axis gui

yes

Also, have you tried if the C axis works in MDI command?

no