new pnc.config won't load in linuxcnc

5 years 3 months ago #215590 by PCW

Replied by PCW on topic new pnc.config won't load in linuxcnc

OK, the firmware looks correct

Is the 7I76 5V power coming from the 6I25 or externally supplied to the 7I76?

Please Log in or Create an account to join the conversation.

5 years 3 months ago #215592 by mjones@welfab.ca

Replied by mjones@welfab.ca on topic new pnc.config won't load in linuxcnc

the 7i76 is externally powered

Please Log in or Create an account to join the conversation.

5 years 3 months ago #215593 by PCW

Replied by PCW on topic new pnc.config won't load in linuxcnc

OK so is the 6I25 W1 in the down position?

Also what are the 7I76 jumper positions?

Please Log in or Create an account to join the conversation.

5 years 3 months ago - 5 years 3 months ago #215596 by mjones@welfab.ca

Replied by mjones@welfab.ca on topic new pnc.config won't load in linuxcnc

w1=left
w2=down
w3=down
w4=up
w5=up
w6=up
w7=down
w8=left
w9=up
w10=left
w11=left
w12=down
w13=left
also 6i25 w1 is down

Last edit: 5 years 3 months ago by mjones@welfab.ca.

Please Log in or Create an account to join the conversation.

5 years 3 months ago #215598 by PCW

Replied by PCW on topic new pnc.config won't load in linuxcnc

No sure I understand, the 7I76 only has 6 jumpers
and they are all right/left orientation

Please Log in or Create an account to join the conversation.

5 years 3 months ago #215599 by mjones@welfab.ca

Replied by mjones@welfab.ca on topic new pnc.config won't load in linuxcnc

its a 7i76E im sure i put that at the beggining

Please Log in or Create an account to join the conversation.

Moderators: cmorley

Time to create page: 0.073 seconds