Re:pncconf - feature requests
11 Feb 2022 22:52 - 11 Feb 2022 22:55 #234619
by PCW
Replied by PCW on topic Re:pncconf - feature requests
Also even on relatively fixed cards like the 7I76E, step/dir pins can
be used for PWM or other functions so a fixed table is pretty limiting,
and this is ignoring 7I76E daughterboards.
The discovery option with mesaflash's pinout list would cover most bases,
especially if mesaflash's daughterboard hints are used.
be used for PWM or other functions so a fixed table is pretty limiting,
and this is ignoring 7I76E daughterboards.
The discovery option with mesaflash's pinout list would cover most bases,
especially if mesaflash's daughterboard hints are used.
Last edit: 11 Feb 2022 22:55 by PCW. Reason: Fix formatting
Please Log in or Create an account to join the conversation.
22 Mar 2024 04:11 #296531
by Tokik
Replied by Tokik on topic pncconf - feature requests
Good afternoon Is it possible to add an MB control board (controller) to the PnCConf Wizard, is it an analogue of the MESA 7I92 board combined with a switching board? Manufacturer’s website www.smd-taxi.ru/mesa-linuxcnc.
Please Log in or Create an account to join the conversation.
Moderators: cmorley
Time to create page: 0.138 seconds