Gscreen - a GTK / Glade / Python based screen

it is possible to see the current work offsets. double click the plot area and set show offsets in the preference page.
yes a tool offsets editor is on the to do list.
chamging the colors of the gcode text should be possible but not in Gscreen. I'll look into how to do that.

Chris m

Rob,
Thanks for the reply. Still having problems.

git reset --hard remotes/origin/master
git pull origin master

That worked fine.

git merge git.mah.priv.at/gitweb/emc2-dev.git gscreen_master

That didn't work:
fatal: ' git.mah.priv.at/gitweb/emc2-dev.git ' does not point to a commit

git pull git.mah.priv.at/gitweb/emc2-dev.git gscreen_master

That also didn't work:
fatal: Couldn't find remote ref gscreen_master

I'm not sure if it's right, but I inserted http:// to make the git URL. Otherwise it wasn't recognized as a remote reference. I also tried git:// but I don't have access.

Karl

git pull git://git.mah.priv.at/emc2-dev.git gscreen_master

should get you there

cncbasher wrote:

git pull git://git.mah.priv.at/emc2-dev.git gscreen_master

should get you there

That did it. Thank you very much.

Karl

New here and have some interest in playing around with this screen. I pulled it off the git link and now seem to have hit a dead end. Do I need to use a developers master branch or will 2.5 work? Any quick pointers to get the tests running.
Thanks
Matt

best to use the developer branch as their are a few changes to other files
not in 2.5